<dfn id="x9x1z"></dfn>
    <pre id="x9x1z"></pre>

        <ruby id="x9x1z"><b id="x9x1z"></b></ruby>
        <ruby id="x9x1z"></ruby><ruby id="x9x1z"><b id="x9x1z"><thead id="x9x1z"></thead></b></ruby>

        <p id="x9x1z"></p>

        <p id="x9x1z"></p>
        當前位置: 首頁 - 新聞資訊 - 行業新聞 -

        通風管道的施工知識你知道哪些?

        來源:http://www.rps-infinia.com 日期:2021-12-20 發布人:jntfgd

        通風管道是為了使空氣流通,降低有害氣體濃度的一種市政基礎設施。通風管,風管制作與安裝所用板材、型材以及其他主要成品材料,應符合設計及相關產品現行標準的規定,并應用出廠檢驗合格證明,材料進場時應按現行有關標準進行驗收。通風管道按材質分:一般有:鋼板風管、鍍鋅板風管、不銹鋼通風管、玻璃鋼通風管、塑料通風管、復合材料通風管、彩鋼夾心保溫板通風管、雙面鋁箔保溫的通風管、單面彩鋼保溫風管、涂膠布通風管、礦用塑料通風管等;
        Ventilation duct is a municipal infrastructure to circulate air and reduce the concentration of harmful gases. The plates, profiles and other main finished materials used for the fabrication and installation of ventilation pipes and air ducts shall comply with the provisions of the current design and relevant product standards, and the factory inspection certificate shall be applied. The materials shall be accepted according to the current relevant standards when entering the site. Ventilation pipes are divided by material: generally, they are: steel plate air pipe, galvanized plate air pipe, stainless steel air pipe, FRP air pipe, plastic air pipe, composite air pipe, color steel sandwich insulation plate air pipe, double-sided aluminum foil insulation air pipe, single-sided color steel insulation air pipe, adhesive coated cloth air pipe, mining plastic air pipe, etc;
        1.對于比較復雜的民用建筑,在設計階段,各工種首先應協商好空間分隔,定出每種管道的標高范圍。一般情況下不得越出給自己規定的界限。遇有個別管段要越界時應與其他工程協商。
        1. For complex civil buildings, in the design stage, various types of work shall first negotiate the space separation and determine the elevation range of each kind of pipeline. Under normal circumstances, you shall not go beyond the limits set for yourself. In case of crossing the boundary of an individual pipe section, it shall negotiate with other projects.
        2.解決各種通風管道相碰及協調的原則,一般為:“小管讓大管,有壓讓無壓”。例如,自來水管與風管相撞,則應當自來水管拐彎。冷、熱水管與下水管相碰,則應改變冷、熱水管道。
        2. The principle to solve the collision and coordination of various ventilation pipes is generally as follows: "small pipe gives way to large pipe, pressure gives way to no pressure". For example, if the water pipe collides with the air pipe, the water pipe should turn. If the cold and hot water pipes collide with the downpipe, the cold and hot water pipes shall be changed.
        3.施工前應設備總管的工程師,將各工種的管線,單線畫在一張平面圖上。每種管道用一種彩色筆。在各交點處綜合其標高,看是否有矛盾之處,及時發現,將問題解決在安裝之前。
        3. Before construction, the engineer of the equipment header shall draw the pipeline and single line of each type of work on a plan. Use a color pen for each pipe. Synthesize the elevation at each intersection to see if there is any contradiction, find it in time and solve the problem before installation.
        4.為了減少投資,節省空間,降低層高,有些敷設無坡度要求的管道,可以穿梁敷設。
        4. In order to reduce investment, save space and reduce floor height, some pipes without slope requirements can be laid through beams.
        上一篇:通風管道怎么降低噪音?
        下一篇:鍍鋅鐵皮風管的安裝方法

        推薦產品

        • 廚房排煙
        • 廚房排煙
        • 軸流風機
        • 不銹鋼制品

        本站圖片均由網站所有方提供,部分圖片來源于網絡,如有任何疑問請及時與我們聯系,未經溝通本站不承擔相關法律責任!

        色一情一乱一伦一区二区三区四区
        <dfn id="x9x1z"></dfn>
          <pre id="x9x1z"></pre>

              <ruby id="x9x1z"><b id="x9x1z"></b></ruby>
              <ruby id="x9x1z"></ruby><ruby id="x9x1z"><b id="x9x1z"><thead id="x9x1z"></thead></b></ruby>

              <p id="x9x1z"></p>

              <p id="x9x1z"></p>